The 1600XP/XPi Series is single-phase double-conversion UPS, available in a range of sizes: 3.6 kVA, 6.0 kVA, 8.0 kVA, 10.0 kVA, 14 kVA, 18 kVA, and 22 kVA. Available in a tower design solution with a LCD touch-screen display that provides unmatched access for UPS monitoring and control. As a double-conversion online UPS, supplies uninterrupted, clean single-phase power to critical systems over large input voltage deviations without resorting to battery backup.
Digital LCD Touchscreen Display
Hot Swappable Batteries
Internal Isolation Transformer
Wide Input Voltage Window
Wide Input Frequency Window
Input Power Factor > 0.95
Power Factor Correction
Output Power Factor 0.85
Optional Network Interface Card for Remote Monitoring/Control
Optional External Battery Cabinets
Optional Environmental Monitoring Device
Manual | Brochure
The 4300 Series is a state-of-the-art UPS designed for the needs of the IT industry. This newly designed UPS has the one of the largest input voltage/frequency windows in the industry. This allows for the unit to extend the life of the battery. The front end IGBT design allows the 4300 Series to work optimally at 0 to 100% load with less than 3% THD on the input. This allows for one-to-one sizing of the generator. The 4300 Series also offers a standard three-year warranty. Optional matching cabinet accessories (battery cabinet and maintenance bypass cabinet) allow for sixty combinations of three-phase/three-wire and three-phase/four-wire input/output voltages.
True Online Double-Conversion
Line-Up-and-Match Ancillary Equipment: Transformer, Battery, & MBS Cabinets
Zero Rear Clearance Required
Complete Front Access Design with Top, Front, and Side Entry
Local Touch-Screen Interface
0.9 Output Power Factor
Input Power Factor > 0.98
Input Current < 3%
Manual | Brochure
The Toshiba 4400 Series uninterruptible power system (UPS) is the next-generation three-phase UPS. The double-conversion, all insulated-gate bipolar transistor (IGBT) 4400 Series UPS features a digitally controlled IGBT input rectifier, an intelligent low harmonic pulse-width modulation (PWM) output, state-of-the-art electronic battery isolation circuitry, and an easy to navigate local touchscreen interface.
The small footprint and total front access mechanical design requires zero rear clearance and includes features such as top, bottom, and/or side cable entry, standard sized air filter provisions, and lockable keyed doors. Customization is available through a number of options, such as internal battery backup, internal transformers for specific voltage applications, and remote monitoring with the Toshiba RemotEye® 4 multi-protocol UPS monitoring solution.
0.9 Power Factor
High Efficiency
Small Footprint
Easily Installed
Manual | Brochure
The G8000 Series UPS is widely used in the medical industry where power protection is critical. The G8000 Series offers unity power factor output which provides 20% more power than other UPS manufacturers. It is also 100% generator compatible, and its low input current harmonics eliminates the need for an oversized generator. In addition, the high crest factor is ideal for medical equipment including MRIs and CT Scanners which have a high current inrush.
Manual | Brochure
The G9000 Series UPS is available in capacities of 100, 160, 225, 300, 500, 750, and 1000kVA and comes with an industry-leading three-year onsite warranty. It is designed for stand-alone or parallel use in up to eight-unit configurations without requiring the use of a special switchgear cabinet.
Using the new Toshiba IGBT technology in the rectifier/converter, DC/DC chopper, and the inverter sections of the UPS, the G9000's double-conversion topology provides an AC/DC/AC efficiencies of up to 97% at loads from 50% to 100%. Even at 20% loading, the efficiency remains greater than 94%. This is 10% to 20% better than current industry systems, making the G9000 excellent for N+1 parallel systems where loads are typically 30-40%.
Manual | Brochure
Toshiba Uninterruptible Power Systems (UPS) offers an exceptional lineup of premium accessories ideal for further UPS customization. Options include matching battery cabinets for uniform installation and energy storage flywheels for the G9000 UPS Series. Additional details are available below.
Available Accessories
Maintenance Bypass Switch (MBS) Panel: Available in floor or wall mounting configurations in two-, three-, and four-breaker configurations with optional kirk-key interlock systems and solenoid release
Battery Cabinets & Racks: Provide uniform appearance to installation and work equally well with Valve-Regulated Led Acid or flooded-cell battery backup
Power Distribution Unit/Remote Power Panel Options: Internal 480/208 transformers and remote power panels available in a range of sizes and capacities for the three-phase systems
Flywheel Energy Storage for G9000 Series: Green alternative and/or supplement to traditional batteries providing safe, reliable energy storage in a robust, lightweight, and compact package with low life-cycle cost
Toshiba Tie Cabinet: Color-matched tie cabinets synchronize and parallel the output of G9000 UPSs to increase capacity up to 6000 KVA
Toshiba Distribution Cabinet: Provides single-operation G9000 UPSs with external maintenance bypass, step-down output transformer, and sub-feed breaker and/or 42-pole panel distribution in one compact uniform cabinet
Manual
Monofásicos
UDE 9100
Memo 9600S
GP800
Brochure new Intrepid Galleon ll (1-3Kva)
New Intrepid ID 900 - ll Series (6 & 10Kva) OnLine UPS
OnLine Intrepid 900 Series (1 - 10Kva) 120V, 60Hz
Trifásicos
New Online Intrepid 900 Pro Series (10-15Kva) 208V 3x3
YDC 3300A
Taurus Pro 208V
B.- Modular + Power 208V
UPS + Power (E 15U-208V)
UPS + Power E (15U-380)
Galleon II (10 - 80 Kw)
Galleon II (10 - 40 Kva)
Intrepid Giant (10 - 40 kva)
Intrepid 8900 Series (10 - 120 kva)
Intrepid A Plus UPS (60-300Kw)
Intrepid Galleon lll (60-200Kw)
Power+ Classic is an electrically and mechanically modular 10-100kVA UPS system, uniquely designed to grow flexibly as your power requirements grow.
Easily upgradable on-site through addition of plug-and-play 10kVA modules
Power+ is a parallel redundant UPS. The system is comprised of 1 to 10 modules of 10kVA each, a system controller, static switch module, and a distribution block.
Power+ offers the optimal combination of efficiency, economy, and usability – and boasts the industry lowest TCO (Total Cost of Ownership) and fastest ROI (Return on Investment).
The flexible system is user upgradable from 10kVA to 100kVA (or 50Kva with a suitable base).
Modules are designed for hot insertion, hot swap.
The battery bank is common to all the modules and can be structured as one or more branches,for battery redundancy.
The Power+ controller has an internal communication card, which in conjunction with Gamatronic's PSM software enables remote management of the unit, including real-time monitoring and operational control.
Parallel option only available for 60kVA & higher (on 100kVA model)
Power+ Classic is available in a 50Kva Static Switch or 100 kVA Static Switch, or 100kVA Static Switch Parallel version.
Centric is an innovative UPS system available in 10 models (25, 50, 75, 100, 125, 150, 175 & 200kVA/kW).
For a complete IT solution we offer 2 models with internal batteries as a 25kW and a 50kW unit.
The Centric provides premium double conversion back up power that is both reliable and clean at an attractive price.
This system is highly suitable for:
Data centers, health care institutes, IT centers, defense industries, telecom companies and various others.
Features:
True on-line battery
Up to 96% efficiency
High Power output & small footprint
Light weight
Advanced colorful LCD touch screen
Additional features available:
Manual Maintenance bypass switch
Email notification of system alarms
Modbus/RS232/RS485 communication protocols
Automatic, orderly shutdown of connected computers during power blackout
Product Snapshot
Topology On-line battery, double-conversion,VFI
Power output (kW/kVA) 50-200
Product Series Centric
Catálogo 208V |
Catálogo 480V
Para recibir cotización de Energía Limpia, favor descargar, llenar y enviar el siguiente PDF a esta dirección de correo, andreschahin@theupsplace.com.
